Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V

Product Images

---

---

---

Models and Specifications

Product Application

---

---

K-Drive VS Other brands

Performance	Common brands	K-Drive
Applicable motors	Asynchronous motors	Asynchronous /synchronous motors
Starting torque	2.0Hz, 150% (sensor-less vector control) 0Hz, 180% (closed-loop vector control)	0.5Hz, 180% (sensor-less vector control) 0Hz, 200% (closed-loop vector control)
Speed adjustable range	1:100 (SVC), 1:1000 (VC)	1:200 (SVC), 1:1000 (VC)
Ambient temperature (no derating required)	-10-40ºC	-10-50ºC (for most of the models)
Rated input voltage	208VAC-400VAC	208VAC-480VAC
Communication	Modbus RTU//ASCII	Modbus RTU//ASCII Profibus-DP, CANopen, etc.
Position control (fixed length, or angular positioning)	×	√
Field weakening control	×	√
Autotune online	Online	Online & Offline
Short-time ramp-up	Trip	No trip
Customized features (software and/or hardware)	Unprocurable or no experience	Procurable with rich experience

How to install variable frequency inverter(vfd)

The installation process for a Variable Frequency Drive (VFD) can vary depending on the specific model and manufacturer, so it's important to refer to the manufacturer's instructions and guidelines. However, here are some general steps that can be followed:

1. Select a suitable location: Choose a location that is clean, dry, and well-ventilated, with adequate space for the VFD and any other associated components.

2. Mount the VFD: The VFD should be mounted securely on a flat, vibration-free surface, and any wiring should be secured and protected from damage.

3. Connect power: The power supply for the VFD should be connected according to the manufacturer's instructions, which typically involve connecting the VFD to a suitable AC power source.

4. Connect the motor: Connect the motor to the VFD according to the manufacturer's instructions, which may involve wiring the motor to the VFD's output terminals.

5. Configure the VFD: Follow the manufacturer's instructions to configure the VFD for the specific application, which may involve setting parameters such as maximum and minimum speeds, acceleration and deceleration rates, and overload protection settings.

6. Test the VFD: Once the VFD is installed and configured, test it thoroughly to ensure that it is operating correctly and safely. This may involve running the motor at different speeds and loads and checking for any issues or abnormalities.

It's important to note that the installation process for a VFD should only be attempted by qualified personnel who are familiar with electrical systems and safety procedures. Improper installation can result in damage to the VFD or motor, as well as serious injury or even death.

Photovoltaic Variable Frequency Inverter

MPPT Variable Frequency Inverter

220V Grid Connected Photovoltaic Inverter

Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V Images